Motorola RDU2080d UHF 2 Watt 10 Ch Business Radio

Thank you for considering the purchase of our Motorola RDX series radio. This is a product of Motorola's 75 years of experience as a world leader in the designing and manufacturing of communications equipment. The RDX Series radios provide cost-effective communications for businesses such as retail stores, restaurants, schools, construction sites, manufacturing, property and hotel management and more. Motorola professional two-way radios are the perfect solution for all of today’s fast-paced industries.

The Motorola RDX series two way radio complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. RDX series radios operate on radio frequencies that are regulated by the Federal Communications Commission FCC. To transmit on these frequencies, you ARE REQUIRED TO HAVE A LICENSE ISSUED BY THE Fcc. APPLICATION IS MADE AVAILABLE ON Fcc FORM 601 and schedule D, H, and Remittance form 159. To obtain these forms and instructions, request documents 000601 which includes all forms and instructions.

Used to turn the radio on or off and to adjust the radios volume.

Used to connect the compatible audio accessories.

Indicates the model of the radio

Speak clearly into the microphone when sending a message

For models RDU2080d and RDV2080d, the antennas are non-removable antenna. For the RDU4160d the antenna is removable.

Used to give battery status, power up status, radio call information and scan status.

This button gives your access to set up features like VOX and iVOX levels, battery type, etc. It also allows you to move through all the features while in the programming mode.

Allows you to change channels and to scroll up and down menu options or set up programming values. These buttons are not programmable buttons.

Button A Default set to generate the current programmed call tone.

Button B Default set to preset channel 1

Button C Default set to preset channel 2

Side buttons

Press and hold down this button to talk, release it to listen.

She Side Button 1 is a general button that can be programmed and configured by the communications programming software. The default setting of SB1 button is set to MONITOR.

The Side Button 2 is a general button that cam be programmed and configure with the communications programming software. The default setting for the SB2 button is Scan / Nuisance channel delete.

RDX series of Motorola two way radios provides different types of batteries.

RDX Series two way radio batteries come in different capacities that will define the battery life. It also offers the option of using alkaline batteries.

The RDX Series Motorola two-way business radio comes equipped with a rechargeable Li-on battery. This battery should be charged before initial use to ensure optimum capacity and performance.

Battery life is determined by several factors . Among the more critical are the regular overcharge of the batteries and the average depth of discharge with each cycle. Typically the greater the overcharge and the deeper the average discharge,, the fewer cycles a battery will last. For example, a battery which is overcharged and discharged 100% several times a day, lasts fewer cycles that a battery that receives less of an overcharge and is discharged to 50% per day. Further, a battery which receives minimal overcharging and averages only 25% discharge, lasts even longer. Motorola batteries are designed specially to be used with a Motorola charger and vice versa. Charging in non Motorola equipment may lead to battery damage and void the battery warranty. The battery should be at about 77 degrees F whenever possible. Charging a cold battery may risk in leakage of electrolyte and ultimately in failure of the battery. Charging a hot battery results in reduced discharge capacity, affecting the performance of the radio. Motorola rapid rate battery chargers contain a temperature sensing circuit to ensure that batteries are charged within certain temperature limits.

Battery Recycling and disposal.

Li-on rechargeable batteries cam be recycles. However, recycling facility may not be available in all areas. Under various U. S. State laws and the laws of several other countries, batteries must be recycled and cannot me disposed of in landfills or incinerators. Contact your local waste management agency for specific requirements and information your area. Motorola fully endorses and encourages the recycling of Li-on batteries.

Features (RDU2080d)

• Exceptional Audio Quality

2000 mW audio output, speaker magnetic field reduction, wind noise reduction and improved RF specification deliver superior audio quality that is 30% louder than Motorola XTN and AX models.

• Power and Coverage

2 watt UHF coverage up to 250,000 sq. Ft., 20 floors.

2 watt VHF coverage up to 220,000 sq. Ft., 13 floors.

• Front Panel Programmability

Five programmable buttons give users quick access to features such as scan list, power select, and manager lock.

• Rugged and Water Resistant

Meets Military 810 C, D, E, and F and IP54/55 specifications for shock, rain, humidity, salt, fog, vibration, sand/dust, temperature shock, high and low temperature.

• Advanced Voice Activation

Enables convenient hands-free operation when used with optional accessories.

• Flexible and Durable Battery Life Solutions

The custom RDX series Li-Ion battery packs are designed to ensure durability. Radios come with a standard Li-Ion battery. Accessories include a high capacity Li-Ion battery and an Alkaline battery kit.

• Business Exclusive Frequencies

Operates on 89 UHF (expanded Vs XTN and AX models) or 27 VHF business exclusive frequencies (varies by model) and features 122 codes to help ensure a clear signal.

• Customer Programmable Software (CPS)

Allows users to perform programming functions and provides access to new features such as Reverse Burst to eliminate unwanted noise, Radio Reporting to manage cloning and radio profiles, Manager Lock, power Select, PL/DPL Defeat and two additional Time Out Timers.

• Tri Color LED Interface

Convenient interface allows users to identify different radio features and radio status.

• Easy Cloning Quickly copy settings with the Radio to Radio Cloning Cable or Multiple Unit Charger. (Both Accessories sold separately.)
• Channel Aliasing

Provides the ability to give each channel a user-defined name.